Handy Ruby one liners by David Thomas

HANDY ONE-LINERS FOR RUBY                             November 16, 2005
compiled by David P Thomas <davidpthomas@gmail.com>         version 1.0

Latest version of this file can be found at:
    http://www.fepus.net/ruby1line.txt

Last Updated: Wed Nov 16 08:35:02 CST 2005

FILE SPACING:

# double space a file
    $  ruby -pe 'puts' < file.txt
# triple space a file
    $  ruby -pe '2.times {puts}' < file.txt
# undo double-spacing (w/ and w/o whitespace in lines)
    $  ruby -lne 'BEGIN{$/="\n\n"}; puts $_' < file.txt
    $  ruby -ne 'BEGIN{$/="\n\n"}; puts $_.chomp' < file.txt
    $  ruby -e 'puts STDIN.readlines.to_s.gsub(/\n\n/, "\n")' < file.txt

NUMBERING:

# number each line of a file (left justified).
    $  ruby -ne 'printf("%-6s%s", $., $_)' < file.txt
# number each line of a file (right justified).
    $  ruby -ne 'printf("%6s%s", $., $_)' < file.txt
# number each line of a file, only print non-blank lines
    $  ruby -e 'while gets; end; puts $.' < file.txt
# count lines (emulates 'wc -l')
    $  ruby -ne 'END {puts $.}' < file.txt
    $  ruby -e 'while gets; end; puts $.' < file.txt

TEXT CONVERSION AND SUBSTITUTION:

# convert DOS newlines (CR/LF) to Unix format (LF)
# - strip newline regardless; re-print with unix EOL
    $  ruby -ne 'BEGIN{$\="\n"}; print $_.chomp' < file.txt

# convert Unix newlines (LF) to DOS format (CR/LF)
# - strip newline regardless; re-print with dos EOL
    $  ruby -ne 'BEGIN{$\="\r\n"}; print $_.chomp' < file.txt

# delete leading whitespace (spaces/tabs/etc) from beginning of each line
    $  ruby -pe 'gsub(/^\s+/, "")' < file.txt

# delete trailing whitespace (spaces/tabs/etc) from end of each line
# - strip newline regardless; replace with default platform record separator
    $  ruby -pe 'gsub(/\s+$/, $/)' < file.txt

# delete BOTH leading and trailing whitespace from each line
    $  ruby -pe 'gsub(/^\s+/, "").gsub(/\s+$/, $/)' < file.txt

# insert 5 blank spaces at the beginning of each line (ie. page offset)
    $  ruby -pe 'gsub(/%/, "   ")' < file.txt
    FAILS! $  ruby -pe 'gsub(/%/, 5.times{putc " "})' < file.txt

# align all text flush right on a 79-column width
    $  ruby -ne 'printf("%79s", $_)' < file.txt

# center all text in middle of 79-column width
    $  ruby -ne 'puts $_.chomp.center(79)' < file.txt
    $  ruby -lne 'puts $_.center(79)' < file.txt

# substitute (find and replace) "foo" with "bar" on each line
    $  ruby -pe 'gsub(/foo/, "bar")' < file.txt

# substitute "foo" with "bar" ONLY for lines which contain "baz"
    $  ruby -pe 'gsub(/foo/, "bar") if $_ =~ /baz/' < file.txt

# substitute "foo" with "bar" EXCEPT for lines which contain "baz"
    $  ruby -pe 'gsub(/foo/, "bar") unless $_ =~ /baz/' < file.txt

# substitute "foo" or "bar" or "baz".... with "baq"
    $  ruby -pe 'gsub(/(foo|bar|baz)/, "baq")' < file.txt

# reverse order of lines (emulates 'tac') IMPROVE
    $  ruby -ne 'BEGIN{@arr=Array.new}; @arr.push $_; END{puts @arr.reverse}' < file.txt

# reverse each character on the line (emulates 'rev')
    $  ruby -ne 'puts $_.chomp.reverse' < file.txt
    $  ruby -lne 'puts $_.reverse' < file.txt

# join pairs of lines side-by-side (like 'paste')
    $  ruby -pe '$_ = $_.chomp + " " + gets if $. % 2' < file.txt

# if a line ends with a backslash, append the next line to it
    $  ruby -pe 'while $_.match(/\\$/); $_ = $_.chomp.chop + gets; end' < file.txt
    $  ruby -e 'puts STDIN.readlines.to_s.gsub(/\\\n/, "")' < file.txt

# if a line begins with an equal sign, append it to the previous line (Unix)
    $  ruby -e 'puts STDIN.readlines.to_s.gsub(/\n=/, "")' < file.txt

# add a blank line every 5 lines (after lines 5, 10, 15, etc)
    $  ruby -pe 'puts if $. % 6 == 0' < file.txt

SELECTIVE PRINTING OF CERTAIN LINES

# print first 10 lines of a file (emulate 'head')
    $  ruby -pe 'exit if $. > 10' < file.txt

# print first line of a file (emulate 'head -1')
    $  ruby -pe 'puts $_; exit' < file.txt

# print the last 10 lines of a file (emulate 'tail'); NOTE reads entire file!
    $  ruby -e 'puts STDIN.readlines.reverse!.slice(0,10).reverse!' < file.txt

# print the last 2 lines of a file (emulate 'tail -2'); NOTE reads entire file!
    $  ruby -e 'puts STDIN.readlines.reverse!.slice(0,2).reverse!' < file.txt

# print the last line of a file (emulates 'tail -1')
    $  ruby -ne 'line = $_; END {puts line}' < file.txt

# print only lines that match a regular expression (emulates 'grep')
    $  ruby -pe 'next unless $_ =~ /regexp/' < file.txt

# print only lines that DO NOT match a regular expression (emulates 'grep')
    $  ruby -pe 'next if $_ =~ /regexp/' < file.txt

# print the line immediately before a regexp, but not the regex matching line
    $  ruby -ne 'puts @prev if $_ =~ /regex/; @prev = $_;' < file.txt

# print the line immediately after a regexp, but not the regex matching line
    $  ruby -ne 'puts $_ if @prev =~ /regex/; @prev = $_;' < file.txt

# grep for foo AND bar AND baz (in any order)
    $  ruby -pe 'next unless $_ =~ /foo/ && $_ =~ /bar/ && $_ =~ /baz/' < file.txt

# grep for foo AND bar AND baz (in order)
    $  ruby -pe 'next unless $_ =~ /foo.*bar.*baz/' < file.txt

# grep for foo OR bar OR baz
    $  ruby -pe 'next unless $_ =~ /(foo|bar|baz)/' < file.txt

# print paragraph if it contains regexp; blank lines separate paragraphs
    $  ruby -ne 'BEGIN{$/="\n\n"}; print $_ if $_ =~ /regexp/' < file.txt

# print paragraph if it contains foo AND bar AND baz (in any order); blank lines separate paragraphs
    $  ruby -ne 'BEGIN{$/="\n\n"}; print $_ if $_ =~ /foo/ && $_ =~ /bar/ && $_ =~ /baz/' < file.txt

# print paragraph if it contains foo AND bar AND baz (in order); blank lines separate paragraphs
    $  ruby -ne 'BEGIN{$/="\n\n"}; print $_ if $_ =~ /(foo.*bar.*baz)/' < file.txt

# print paragraph if it contains foo OR bar OR baz; blank lines separate paragraphs
    $  ruby -ne 'BEGIN{$/="\n\n"}; print $_ if $_ =~ /(foo|bar|baz)/' < file.txt

# print only lines of 65 characters or greater
    $  ruby -pe 'next unless $_.chomp.length >= 65' < file.txt
    $  ruby -lpe 'next unless $_.length >= 65' < file.txt

# print only lines of 65 characters or less
    $  ruby -pe 'next unless $_.chomp.length < 65' < file.txt
    $  ruby -lpe 'next unless $_.length < 65' < file.txt

# print section of file from regex to end of file
    $  ruby -pe '@found=true if $_ =~ /regex/; next unless @found' < file.txt

# print section of file based on line numbers (eg. lines 2-7 inclusive)
    $  ruby -pe 'next unless $. >= 2 && $. <= 7' < file.txt

# print line number 52
    $  ruby -pe 'next unless $. == 52' < file.txt

# print every 3rd line starting at line 4
    $  ruby -pe 'next unless $. >= 4 && $. % 3 == 0' < file.txt

# print section of file between two regular expressions, /foo/ and /bar/
    $  ruby -ne '@found=true if $_ =~ /foo/; next unless @found; puts $_; exit if $_ =~ /bar/' < file.txt

SELECTIVE DELETION OF CERTAIN LINES

# print all of file except between two regular expressions, /foo/ and /bar/
    $  ruby -ne '@found = true if $_ =~ /foo/; puts $_ unless @found; @found = false if $_ =~ /bar/' < file.txt

# print file and remove duplicate, consecutive lines from a file (emulates 'uniq')
    $  ruby -ne 'puts $_ unless $_ == @prev; @prev = $_' < file.txt

# print file and remove duplicate, non-consecutive lines from a file (careful of memory!)
    $  ruby -e 'puts STDIN.readlines.sort.uniq!.to_s' < file.txt

# print file except for first 10 lines
    $  ruby -pe 'next if $. <= 10' < file.txt

# print file except for last line
    $  ruby -e 'lines=STDIN.readlines; puts lines[0,lines.size-1]' < file.txt

# print file except for last 2 lines
    $  ruby -e 'lines=STDIN.readlines; puts lines[0,lines.size-2]' < file.txt

# print file except for last 10 lines
    $  ruby -e 'lines=STDIN.readlines; puts lines[0,lines.size-10]' < file.txt

# print file except for every 8th line
    $  ruby -pe 'next if $. % 8 == 0' < file.txt

# print file except for blank lines
    $  ruby -pe 'next if $_ =~ /^\s*$/' < file.txt

# delete all consecutive blank lines from a file except the first
    $  ruby -e 'BEGIN{$/=nil}; puts STDIN.readlines.to_s.gsub(/\n(\n)+/, "\n\n")' < file.txt

# delete all consecutive blank lines from a file except for the first 2
    $  ruby -e 'BEGIN{$/=nil}; puts STDIN.readlines.to_s.gsub(/\n(\n)+/, "\n\n")' < file.txt

# delete all leading blank lines at top of file
    $  ruby -pe '@lineFound = true if $_ !~ /^\s*$/; next if !@lineFound' < file.txt


If you have any additional scripts to contribute or if you find errors
in this document, please send an e-mail to the compiler.  Indicate the
version of ruby you used, the operating system it was compiled for, and
the nature of the problem.  Various scripts in this file were written or
contributed by:

 David P Thomas <davidpthomas@gmail.com>    # author of this document


Tue Jun 26 18:17:36 CDT 2007
 * Thanks to Taylor Carpenter <taylor@codecafe.com> for feedback on improving redirection format.

 

views
5 responses
# Calculate sum of numbers:
$ ruby -e "puts STDIN.readlines.inject(0){|s,a| s + a.to_i}"

# Calculate sum of numbers (floating point):
$ ruby -e "puts STDIN.readlines.inject(0){|s,a| s + a.to_f}"

(Rails has Array.sum, but the array would be added as String's)

Nice post.. helped me a lot.. One command it saved 3 days worth effort. cheers mate.
3 visitors upvoted this post.